Structural Engineering & Statics
where the load goes
Concept

Creep coefficient — where it appears

The ratio of the strain concrete adds by creep under a sustained stress to the strain it took at once. It depends on the age at loading, the member's size and the air's humidity, and it is predicted to perhaps thirty per cent, which is why any deflection that waits for it is uncertain by as much.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

Thirty years later, two concretes against one. Stress down the composite section after thirty years — a 160 mm slab cast 6 weeks after a 700 mm pretensioned beam — computed twice: with the slab as a second, younger concrete that creeps and shrinks by its own laws, and with it given the beam's concrete and age. With two concretes the slab ends at −0.15 N/mm² at its top and −0.30 at its bottom, the beam at −4.03 at its top and −7.43 at its soffit. With one, the slab is at −0.29 and −1.06, the beam at −2.22 and −8.37. The slab's own shrinkage has taken its compression away and handed it to the top of the beam, and the soffit — the fibre the prestress was designed to keep in compression — has lost 0.94 N/mm² of it. Compression is negative.

The slab that shrinks onto a finished beam

A precast beam with an in-situ slab cast on it is one member made of two concretes, and they do not age together. The slab's shrinkage is nearly the same whenever it is poured; what changes is how much shrinking the beam has left to share it with. Cast the slab at six weeks and it takes a ninth of the soffit's precompression away over thirty years. Cast it at a year and it takes a quarter, and goes into tension itself.

materials · Creep The survey knows the creep once most of the floors are set. The doubt about the creep of a 40-storey building cast a floor every seven days, its creep known to ±30 per cent, as the half-width of its 95% band, after a survey of every floor set by then — each read to a standard error of 1.0 mm — against the floor it is made after: from the survey alone (drawn at 100% where it is larger), and combined with the design's ±30%; beside them, the share of the building's floors still to be cast, which are all a survey can correct. The survey alone beats the design's doubt only after floor 25, with 38% of the floors still to cast; the combined doubt halves after floor 31, with 23% still to cast.

The survey that arrives after the floors

A tall building's lower storeys start shortening months before its upper floors are cast, so a survey every ten floors should tell the creep the building really has and let the floors still to come be set for it. It does tell it, to a millimetre's precision, after the twenty-fifth floor. By then most of the floors whose height it was meant to correct are already set, and the floor that ends furthest from level is the one no survey can help.

deflection · Differential shortening

Named alongside it

The objects these essays reach for when they reach for this one.

CreepCamberComposite actionConstruction sequenceDifferential shorteningPrecast concretePrestressRestrained strainSamplingServiceabilityShrinkageTolerance

All concepts