Structural Engineering & Statics
where the load goes
Concept

Hollow section

2 essays name this object, across 2 fields. What follows is each of them, and the objects they name alongside it.
closedJ = 5.66×10⁷ mm⁴twist 0.187° over 3.0 mpeak shear stress 8.5 N/mm²slit along its lengthJ = 1.31×10⁵ mm⁴twist 80.950° over 3.0 mpeak shear stress 305.2 N/mm²J closed ÷ J open = 432

The moment that will not lie flat

A plane cut exposes three actions. A real cut exposes six, and the fourth of them behaves unlike the others — torsion is resisted by a loop of shear, and one slit down the length of a tube destroys it.

internal-forces · internal forces the same, laid flatI = 0.06 × 10⁶1.0× the firstsquareI = 0.75 × 10⁶13.3× the firsttall rectangleI = 10.00 × 10⁶177.8× the firstI-sectionI = 24.29 × 10⁶431.8× the firstevery section here has an area of 3000 — only the shape differsthe bar is the second moment of area, to scale

The same steel in a different shape, and a factor of forty

Four sections of identical area, identical weight and identical cost. The stiffest is dozens of times the stiffest of the flattest, and the only thing that changed was the arrangement.

sections · section shape

Named alongside it

The objects these essays reach for when they reach for this one.

TorsionI-sectionLocal bucklingOpen sectionSecond moment of areaSection shapeShape factorShear centreShear flowStress resultantTorsion constantWarping

All concepts