Structural Engineering & Statics
where the load goes
Concept

Deviation force — where it appears

The transverse load a curved force path demands to stay on its curve, equal to the force divided by the radius per unit length. It is the same identity behind a prestress equivalent load, a hoop tension, an arch thrust and a web that buckles with nothing applied to it.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

The tendon is a load, pointing the other way. A 14 m beam with a parabolic tendon dropping 260 mm to midspan, stressed to 1440 kN after losses. Its curvature pushes the beam up along its whole length with an intensity of 8Pe/L² = 15.28 kN/m, against an applied 17.63 kN/m — so 2.34 kN/m is left to bend anything, and the beam carries 57.4 kNm where an unstressed one carries 432 kNm. What the section then feels is 6.40 MPa of uniform compression and very little else.

The load that comes from changing direction

A force that travels in a straight line asks nothing of anything. Bend its path and it asks for a transverse load of F over R along every millimetre of the curve, and that load is real, is nowhere on the load schedule, and is the same statement behind a prestressing tendon, a hoop force, an arch thrust and a web that buckles with nothing applied to it.

internal-forces · deviation force A transverse load with nothing applied. Web slenderness against web thickness, with the limit the flange's own curvature sets. A flange carrying 6213 kN and curved to a radius of 592 m needs 10.5 N per millimetre of radial force to stay on its curve, and the only thing available to supply it is the web. Nothing has been applied to the girder: the load comes from the deflected shape, which is why a straight beam has none of it and a beam at a plastic hinge has a great deal. Setting the radial force against the web's own plate-buckling resistance gives, in four lines, h_w/t_w ≤ k·(E/f_yf)·√(A_w/A_fc) — the form the codes use, arrived at without them. The constants differ: an elastic flange strain gives k = 1.34 and the rule uses 0.3, a factor of 4.5, and the gap is the curvature assumed. k goes as the inverse square root of the flange strain, so 0.3 is a flange strained to 3.4% — which is what a plastic hinge does to it. The rule is not conservative; it is written about a different beam.

The web that is crushed from inside

A plate girder's compression flange is curved by the beam's own deflection, and a curved force needs a transverse load to stay on its curve. The only thing available to supply it is the web. So a deep girder can buckle its web vertically with nothing applied to it at all, and the rule that prevents it is the only clause in the codes about a load no load case contains.

stability · flange induced

Named alongside it

The objects these essays reach for when they reach for this one.

CurvatureFree bodyLoad pathBucklingCableEquilibriumEquivalent loadFlange induced bucklingFunicularHoop tensionLoad balancingLocal buckling

All concepts