Structural Engineering & Statics
where the load goes
Concept

Geometry — where it appears

The arrangement of a structure's members and the shape of its sections, which decides most structural outcomes before any material property is chosen. Stability, load path and the distribution of internal forces all follow from it, and none of them can be recovered by a stronger material.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

Four details, and no material anywhere on the plot. Stress range against cycles to failure for four detail categorys — 160, 112, 71, 36 N/mm² at two million cycles. The lines are parallel because they share a slope of three, and the spread between them is a factor of 4.4 in stress and therefore 88 in life. Nothing on this plot depends on the strength of the steel: the same detail in a grade twice as strong lies on the same line. At a stress range of 62 N/mm² the lives are 160: unlimited, 112: 2.1e+7, 71: 3.0e+6, 36: 3.9e+5 cycles. The knee in each line is the constant-amplitude limit, past which the slope becomes five.

The detail decides and the steel does not

A fatigue check contains no material strength anywhere. The same detail in a steel twice as strong lies on exactly the same line, because a fatigue life is decided by the geometry of a weld and by the stress range it sees — and two per cent of the traffic does most of the damage, because life goes as the inverse cube of the range.

connections · Detail category Cut the throat, and the face carries a moment and a tension at once. A crane hook of trapezoid section, 50 to 120 mm radius and 40 to 15 mm wide, carrying 100 kN, drawn beside the section at the cut and the stress across it. The load hangs on a line through the centre of curvature, so cutting the throat and taking everything below the cut as the free body leaves a face carrying a direct tension of 100 kN and a moment of N·R = 7.970 kN·m about the section's own centroid, which sits a full R = 79.70 mm from the load line. The stress is a hyperbola, zero at r = 75.04 mm rather than at the centroid 4.65 mm outside it, reaching 497.5 N/mm² of tension at the inner fibre and 281.3 of compression at the outer. The straight-beam formula, drawn dashed, reports 323.4 N/mm² for the bending part against the true 445.5, and leaves the 51.9 N/mm² of direct tension out altogether — between them, 54% under the real peak, at the fibre where a hook actually breaks. This is why a hook is trapezoidal: both effects are worst inside, so the material goes there.

The wide side goes inside

A crane hook's section is a trapezoid with its broad face towards the centre of curvature, and that is not a casting convenience. Turn the same section round — same area, same depth, same moment — and the stress at the fibre that breaks rises by thirty-nine per cent. The shape is doing two things at once, and only one of them is in a straight beam's arithmetic.

sections · Curved beam

Named alongside it

The objects these essays reach for when they reach for this one.

FatigueBending stressCentroidCrack growthCurvatureCurved beamDetail categoryElastic limitEndurance limitEquivalent loadFractureInspection

All concepts