Structural Engineering & Statics
where the load goes
Concept

Shift rule — where it appears

The requirement that a tension chord be designed for the moment a distance a_l further along the span than the section it is at. It comes from the truss inside a cracked beam rather than from bending: the diagonal delivering the shear arrives at an angle, so the chord force at a section is set by the shear a lever arm away.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

The cut that severs the stirrups is the cut that counts them. A cracked web drawn as the truss it has become: a tension chord along the bottom, a compression chord along the top, concrete struts between the cracks and stirrups crossing them. The free body is a cut parallel to the cracks, which over a lever arm of 495 mm severs z·cot θ/s = 8.3 stirrups at cot θ = 2.5. Every one of them is at yield, so the shear is their number times their strength, and flattening the crack raises the count rather than the strength. The same cut passes through the bottom chord, which is where the chord force the moment diagram does not contain comes from.

The beam that becomes a truss

Once a web has cracked in shear there is no shear stress field in it any more. There are concrete struts, two chords and whatever crosses the cracks, and the angle of those cracks is not a property of the material — it is something the designer chooses, and every quantity in the beam moves when it changes.

internal-forces · Shear truss analogy Where a bar may stop, and how far past there it goes anyway. The tension the bottom steel must carry along a 9 m beam, and the resistance of the bars actually present, drawn as a staircase. The demand is the moment diagram divided by the lever arm and then SHIFTED 270 mm toward midspan, because the truss inside the beam delivers its shear diagonally — the two constructions agree to 0.36 per cent, which is the second-order term and nothing else. Each curtailed layer then runs a further 1150 mm to develop, so the outer layer stops at 245 mm rather than the 1665 mm the moment diagram allows. The tail is 1420 mm at each end — 16 per cent of the span — and it is what turns a 20 per cent saving into 2.2.

Where a bar may stop

The moment diagram falls away from midspan, so the steel midspan needs is not needed everywhere, and curtailing it saves real money. Then two things get in the way, and between them they take nine tenths of what the moment diagram promised.

sections · Curtailment Flattening the truss saves stirrups and crushes the web. Two capacities against the angle of the cracks, for a web 350 mm wide with a lever arm of 630 mm. The rising line is the stirrups: a cut along the crack severs z·cot θ/s of them, so flattening the crack from 45° to cot θ = 2.5 takes the 315 kN they carry to 787 — 2.5 times as much from the same steel. The falling line is the concrete strut, whose stress is V(cot θ + tan θ)/b_w z and therefore least at 45°. They do not cross in this range, so the stirrups govern throughout and the angle is a free choice.

The angle is a choice, not a property

The truss inside a cracked concrete web has a strut angle, and nothing measures it. The designer picks it, the stirrup requirement falls as it flattens, the web stress rises, and every choice in between is a different structure that carries the same load.

internal-forces · Concrete shear

Named alongside it

The objects these essays reach for when they reach for this one.

EquilibriumFree bodyLever armReinforcementStirrupStrut-and-tieTruss analogyWeb crushingAggregate interlockAnchorageConcrete shearConcrete strut

All concepts