Structural Engineering & Statics
where the load goes
Concept

Polar distance — where it appears

The horizontal distance from the pole to the load line in a funicular construction, measured in units of force. It sets how deep the funicular polygon is drawn, and the polygon's depth below its closing line times the polar distance is the bending moment; for an arch it is the thrust.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The pole, the strings, and the resultant of any number of forces. Five downward loads on a span of 10 m — 30 kN at 1.5 m, 20 kN at 3.5 m, 45 kN at 5.0 m, 25 kN at 7.0 m, 35 kN at 8.5 m — adding to 155.0 kN. On the right, the loads laid end to end down one line, with a pole 60.0 kN to the left of it and a ray drawn to every division between them. On the left, the funicular polygon: each segment parallel to the ray of the loads it has passed, so the shape is the one a string carrying these loads would hang in. The first and last strings are extended until they cross, at 5.24 m, and that crossing is where the 155.0 kN resultant acts — the same station the moment sum Σ P x / Σ P gives, 5.24 m, reached with no pole in it at all.

The pole decides the drawing, not the answer

Five forces will not pair off the way four do. They need a point that is nowhere on the structure — chosen freely, by whoever is holding the pencil — and the string of lines it generates. Every choice draws a different polygon and finds the same resultant, and the shape it draws turns out to be the beam's bending moment diagram.

equilibrium · Graphic statics Putting a funicular through three points. Four loads — 40.0 kN at 3.0 m, 60.0 kN at 7.0 m, 30.0 kN at 12.0 m, 50.0 kN at 16.0 m — and three points the polygon must pass through: A and B at the springings and C, 5.0 m above their chord at 10.0 m. A trial pole, dashed, draws a polygon from A that ends 6.39 m below B. The ray through the trial pole parallel to its own closing line cuts the load line at Q, 95.0 kN from the top, which is the left reaction of a simple beam on A and B and does not depend on the pole at all. Every pole whose polygon passes through A and B lies on the line through Q parallel to A B; the one whose polygon also reaches C is 98.0 kN from the load line, which is the moment at C of that simple beam, 490.0 kN·m, divided by C's height above the chord. That is the three-hinged arch's thrust — the four equilibrium equations give 98.0 kN.

The polygon that runs out of freedom

A funicular polygon for given loads has exactly three freedoms, so it can be made to pass through three chosen points and no more. Three points is a three-hinged arch, and the drawing solves it. Take the crown hinge away and one freedom is left over. The drawing then offers a whole family of thrust lines and cannot say which one the arch uses — the rib's stiffness decides, and stiffness is not on the paper.

equilibrium · Graphic statics

Named alongside it

The objects these essays reach for when they reach for this one.

FunicularGraphic staticsArchBending momentCompatibilityForce polygonFree body diagramIndeterminacyInfluence lineLine of actionResultantThrust line

All concepts