Structural Engineering & Statics
where the load goes
Concept

Conservation of energy — where it appears

The accounting rule that work done on a structure is stored, dissipated or carried away as motion, and never simply disappears. Written for a structure it becomes the energy methods: work done equals strain energy stored, which is where Castigliano's theorems and the Rayleigh quotient both come from.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

20 kN applied at once and held, on a structure of 0.500 s period. Displacement against time for a single-degree-of-freedom structure of natural period 0.500 s and 2.0% damping, under 20 kN applied at once and held. The static deflection under the same peak force is 12.67 mm and the peak response is 24.56 mm — a factor of 1.94.

Twice the deflection, for the same load

A weight placed gently on a beam deflects it by one amount. The same weight let go from rest, a millimetre above the same beam, deflects it by twice as much — and the factor of two is exact, for every structure ever built.

dynamics · Dynamic amplification What a drop height is worth, as a factor on the answer for a weight placed slowly. The peak displacement as a multiple of the static deflection, against the height a weight is dropped from divided by the deflection that weight causes when it is placed. The curve is 1 + √(1 + 2h/δ), which is conservation of energy and nothing else: the weight does work over the height it falls PLUS the distance the structure then gives, and the structure stores work only over the second. At a ratio of 40 the factor is 10.00, and at zero it is exactly 2 — the marked point, where a dropped weight becomes a placed one.

The weight that was dropped

A half-tonne load lowered onto a beam produces 5 kN. The same load dropped one metre onto the same beam produces 160 kN — and onto a beam ten times softer, 54 kN. The stiff structure is the one that suffers, which is the opposite of nearly every other rule about structures.

dynamics · Impact factor Four guesses at one buckling mode. A pin-ended column, with four assumed shapes and the load each of them gives. The reference is a ten-term Ritz expansion solved as an eigenvalue problem, at 9.8696 EI/L² — which is π², as it must be. a half sine gives 9.870, its own sag shape gives 9.882, a mid-span sag gives 10.000, a parabola gives 12.000. Every one of them is high and none of them is low, because an assumed shape is a constraint on the column and a constraint can only stiffen it.

Guessing the shape, and getting the load anyway

A column's buckling load can be had from a shape that is wrong everywhere, because the energy criterion is stationary at the true mode. The error in the load is the square of the error in the shape, and it is always high.

stability · Stability energy

Named alongside it

The objects these essays reach for when they reach for this one.

Strain energyDynamic amplificationImpact factorImpulseStiffnessBuckled mode shapeCrane loadingCritical loadEffective lengthEigenvalueEuler bucklingFall-arrest

All concepts