Structural Engineering & Statics
where the load goes
Concept

Deck — where it appears

The surface of a bridge or a floor that carries traffic directly and delivers it to the structure beneath. It is nearly always part of that structure too — a flange, a diaphragm, a stiffened plate — so a load on it is being carried by several systems at once and the stresses add.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The tie is a redundancy, so its stiffness decides the thrust. Thrust and rib bending for a 60 m tied arch of 0.15 rise ratio, against the stiffness of its tie. Cut the tie and the structure is a curved simply supported beam, so the tie force is the one redundant and the force method gives it: with a rigid tie the answer is 2229 kN, within 0.9 per cent of the funicular wL²/8f, and the shortfall is the arch's own axial shortening. A real tie stretches 68 mm and returns 2168 kN — 2.7 per cent of the flexibility is the tie — and whatever thrust the arch does not get, it carries as bending: 739 kNm at 30 m. A tenth of the tie stiffness is not a tenth of the problem; it is a different structure.

The thrust that never reaches the ground

Every arch on this site has ended at the same sentence — the foundation is where an arch is really decided. A tie changes the sentence without changing the arithmetic: the horizontal force is still there, still the same size, and it now closes on itself through a bar at deck level.

structures · Tied arch The same bridge by the two theories it might have been designed by. Deck moment along a 500 m suspended span with half of it loaded, computed twice. Elastic theory treats the deck as a beam and applies the cable's extra tension as an upward load: 80.1 MN·m. Deflection theory keeps the cable's total tension acting on the deck's own deflected shape — a geometric stiffness — and returns 56.3, which is 30 per cent less. The extra cable tension is very nearly the same in both (6.20 against 6.11 MN), so nothing about the cable is in the difference: it is entirely the H·v″ term the older theory drops.

The tension that was left out

A suspension bridge's deck sits on a cable pulling hard along it, and a member with a large tension in it is stiffened by that tension. Leaving the term out of the deck's own equilibrium is what elastic theory does, and on a long span it asks for fourteen times the girder.

structures · Stiffening girder

Named alongside it

The objects these essays reach for when they reach for this one.

Bending momentCompatibilityFunicularArchAxial shorteningCable stiffnessDeflection theoryFlexibilityForce methodGeometric stiffnessHangerLive load

All concepts