Structural Engineering & Statics
where the load goes
Generator

The hoops change their mind at an angle no proportion chose

Rendered here at the parameters it defaults to, with every essay that calls it — which is the same list as the blast radius of changing it.
The hoops change their mind at an angle no proportion chose. The two membrane forces of a spherical dome of radius 30 m under 3 kN/m² of surface, taken from the crown to a base at 60°. The free body for the meridional force is the cap above a cone of half-angle φ, and vertical equilibrium of it gives N_φ = −wR/(1 + cos φ) directly: -45.0 kN/m at the crown falling to -60.0 at the base, compression everywhere. Equilibrium normal to the surface then gives the hoop force, which starts at -45.0 kN/m and reaches 15.0 — it changes sign, and the angle at which it does was found here by bisecting N_θ rather than quoted: 51.827292°. Setting N_θ = 0 gives cos²φ + cos φ − 1 = 0, so cos φ is (√5 − 1)/2, the reciprocal of the golden ratio — an identity this site's solver gate checks against the bisection to nine decimals rather than asserting, because it is too pretty to be believed on sight. Below that parallel the hoops are in tension, which masonry has none of, and that is where every old dome is cracked.

The hoops change their mind at an angle no proportion chose. The two membrane forces of a spherical dome of radius 30 m under 3 kN/m² of surface, taken from the crown to a base at 60°. The free body for the meridional force is the cap above a cone of half-angle φ, and vertical equilibrium of it gives N_φ = −wR/(1 + cos φ) directly: -45.0 kN/m at the crown falling to -60.0 at the base, compression everywhere. Equilibrium normal to the surface then gives the hoop force, which starts at -45.0 kN/m and reaches 15.0 — it changes sign, and the angle at which it does was found here by bisecting N_θ rather than quoted: 51.827292°. Setting N_θ = 0 gives cos²φ + cos φ − 1 = 0, so cos φ is (√5 − 1)/2, the reciprocal of the golden ratio — an identity this site's solver gate checks against the bisection to nine decimals rather than asserting, because it is too pretty to be believed on sight. Below that parallel the hoops are in tension, which masonry has none of, and that is where every old dome is cracked.

12 essays call shell-membrane. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

The hoops change their mind at an angle no proportion chose. The two membrane forces of a spherical dome of radius 30 m under 3 kN/m² of surface, taken from the crown to a base at 60°. The free body for the meridional force is the cap above a cone of half-angle φ, and vertical equilibrium of it gives N_φ = −wR/(1 + cos φ) directly: -45.0 kN/m at the crown falling to -60.0 at the base, compression everywhere. Equilibrium normal to the surface then gives the hoop force, which starts at -45.0 kN/m and reaches 15.0 — it changes sign, and the angle at which it does was found here by bisecting N_θ rather than quoted: 51.827292°. Setting N_θ = 0 gives cos²φ + cos φ − 1 = 0, so cos φ is (√5 − 1)/2, the reciprocal of the golden ratio — an identity this site's solver gate checks against the bisection to nine decimals rather than asserting, because it is too pretty to be believed on sight. Below that parallel the hoops are in tension, which masonry has none of, and that is where every old dome is cracked. Structural form

The surface that carries by being curved

A flat plate spends its thickness on a lever arm of a few millimetres. Curve the same sheet and the load is carried in the surface itself, at a thirtieth of the thickness — and the entire bill is presented at the edges.

 The same sheet, twice, and a factor of ten thousand. A 3000 mm developed width of 3 mm sheet, covering 2400 mm in plan — so the legs sit at 36.9° and the fold is 300 mm deep. Flat, its second moment about its own mid-plane is 6750 mm⁴, which spans nothing. Folded, it is 67.50×10⁶ — 10000 times as much, which is exactly the depth in thicknesses squared. The material is identical, the plan cover has fallen by 20%, and the only thing that changed is where the material sits. What limits it is buckling of the leg: at this leg length the flat between the folds goes at 27 N/mm², well below the steel's 275. Structural form

Folded until it spans

A flat sheet has a second moment of area of B·t³/12 and will not span anything. Folded, the same material has B·t·h²/12, and the gain is exactly the fold depth over the thickness, squared — a ratio with no material in it and no width in it.

 Held up by a pressure nobody can feel. An air-supported roof of 60 m span and 9 m rise. The membrane has no bending stiffness whatever, so the only thing that can hold it in tension is a pressure difference, and the pressure has to exceed the load per unit plan area and nothing else: 0.25 kN/m² of fabric plus 0.6 of snow is 0.85 kN/m², so 1.19 kN/m² does it — 1190 pascals, which is 1.17 per cent of an atmosphere and 121 millimetres of water. Ears do not notice it. A door does: at 2.1 kN on an ordinary leaf, the building needs an airlock rather than a handle. And the whole of it arrives at the foundation as 3365 kN of uplift — 17.9 kN on every metre of perimeter — which is the bill the pressure's smallness conceals. Structural form

Held up by the air inside

A membrane has no bending stiffness at all, so the only thing that can hold it in tension is a pressure difference. The pressure needed to hold up a roof is smaller than the pressure a closed door makes — and the same pressure arrives at the foundation as hundreds of tonnes of uplift.

 The free body that makes a hoop force a pressure times a radius. Half a ring cut along a diameter, with the pressure drawn normal to the wall wherever the wall is. Vertical equilibrium of the half ring is the whole derivation: the pressure acts over the projected width 2R whatever the shape of the arc, the two cut faces carry N each, so N = pR — 300 kN per metre here at 1 MPa on a 0.3 m radius. The result contains no wall thickness, no second moment, and no length along the pipe, which is why a hoop force is the one internal force in this collection that arrives with no lever arm attached to it. The stress does contain the thickness — 25 MPa at 12 mm — but the force does not, and a thicker wall carries exactly the same force at a lower stress. Internal forces

The force that is only a radius

Every internal force in this collection arrives with a lever arm attached. A hoop force does not. Cut a cylinder along a diameter and the free body settles it in one line — pressure times radius, with no thickness, no second moment and no length in it — which is why a tank wall is thin and why its worst hoop force is not at the bottom.

 Four ways to make a cell resist being racked, and one that is not one. One cell of a grid shell under the membrane shear it has to carry, by the four mechanisms available for carrying it, with the racking each produces over a 30 m span under 1.2 kN/m² of asymmetric load. A serviceability limit of span/250 is 120 mm. Four pin-jointed bars in a quadrilateral have no in-plane shear stiffness whatever — the cell folds, and the answer is not a large deflection but a mechanism. Rigid nodes carry the shear by bending the members over a cell, which smears to 12EI/s³ and comes to 0.35% of what a continuous sheet of the same stretching stiffness gives: 1205 mm, ten times the limit. One diagonal per cell, or a third member direction, carries it axially instead and lands within a factor of two of the sheet. That is the whole difference between a grid shell and a row of arches. Structural form

A shell only if the grid takes shear

A curved surface carries load in its own plane at a fraction of the material a flat one needs, and every gridshell ever built is an attempt to buy that with members instead of with a surface. The attempt succeeds or fails on one property nobody draws — whether four bars meeting at a corner can resist being racked — and a pinned quadrilateral grid cannot resist it at all.

 Deflection goes as the fourth power of the span. Deflection against span for a constant load intensity and section, with two slower relationships drawn faintly behind it for comparison: the load itself, which grows in proportion to the span, and the bending moment, which grows as its square. Doubling the span multiplies the deflection by sixteen, while the moment only quadruples. Equilibrium

The weight that has to be known before it can be found

Every other load arrives from outside and can be looked up. A structure's own weight depends on how big it is, and how big it is depends on the load — so the first calculation on any project is a fixed point, and the fraction of a member spent carrying itself turns out to be the square of its span as a fraction of a span it can never reach.

 Three ways to move the same column, and they are not close. The same 2000 kN moved 3 m across 14 m, built three ways and drawn to one scale. The deep beam is 1.14 m of concrete, 24.1 tonnes, and settles 60.6 mm in the long term. The storey-deep truss takes the same moment as a couple at 3.6 m centres, so its chords carry M/h and it weighs 2.6 tonnes — a fifth of the beam — while settling 15.8 mm, and it does not creep. The wall is 72.8 tonnes and hardly moves at all, 1.71 mm, of which 36% is shear rather than bending — which is what a member as deep as it is long always does, and is why beam theory does not describe one. A wall as a deep beam is the stiffest of the three by a factor of 35.4. Structural form

The same span, four ways

A beam, a truss, an arch and a cable can all cross the same gap under the same load, and the choice between them is usually described as a matter of judgement or of taste. It is neither. Each carries the load by a different mechanism, each mechanism has a different exponent, and an exponent decides the ordering at every span rather than at some spans.

 A broad tank sloshes and a tall one does not. The liquid's division into the part that moves with the wall and the part that sloshes, against the tank's proportion. The convective masses come from the potential-flow solution and the impulsive mass is whatever is left, so the two sum to the liquid's mass exactly at every proportion rather than approximately over part of the range. A tall tank at H/R = 3 is 84% impulsive and behaves almost like a solid; a shallow one at H/R = 0.5 is 72% convective and most of its contents never notice the earthquake. This tank sits at H/R = 1.33, which is 65% impulsive. Dynamics

The liquid has a period of its own

Shake a tank and its contents do not all go with it. Part of the liquid moves as though it were bolted to the wall and part sloshes at a period fixed by gravity and the radius, which the tank's stiffness has no influence over whatever. The split is decided by one proportion, and the two parts then take entirely different amounts of the earthquake.

 The tendon is a load, pointing the other way. A 14 m beam with a parabolic tendon dropping 260 mm to midspan, stressed to 1440 kN after losses. Its curvature pushes the beam up along its whole length with an intensity of 8Pe/L² = 15.28 kN/m, against an applied 17.63 kN/m — so 2.34 kN/m is left to bend anything, and the beam carries 57.4 kNm where an unstressed one carries 432 kNm. What the section then feels is 6.40 MPa of uniform compression and very little else. Internal forces

The load that comes from changing direction

A force that travels in a straight line asks nothing of anything. Bend its path and it asks for a transverse load of F over R along every millimetre of the curve, and that load is real, is nowhere on the load schedule, and is the same statement behind a prestressing tendon, a hoop force, an arch thrust and a web that buckles with nothing applied to it.

 Two curvatures of opposite sign, which is what makes it a structure. A cable net over a 36 m square, drawn as the two families of cables that are also the two rulings of the surface. One family sags and carries downward load by hanging; the other rises and carries upward load — wind uplift, and a load reversal anywhere — by the same mechanism upside down. Neither can do anything alone. A single family of cables is a mechanism: it changes shape freely under any load pattern it was not tensioned for, and the shape it moves to is decided by the load rather than by the designer. Put the two together and each is the other's restraint, but only if they are pulled against one another first — the pretension of 520 kN in the sagging family and 715 in the hogging one is a self-equilibrating state that exists with no load on the roof at all, and it is what turns two mechanisms into one structure. The curvatures are drawn four times their true value: a real net of this span sags 2.2 m over 36, which is flatter than it looks anywhere. Structural form

Two curvatures of opposite sign

A single family of cables is not a structure. It is a mechanism that takes whatever shape the load asks for, and it will do that under any load pattern it was not tensioned for. Cross it with a second family curved the other way, pull the two against each other, and the pair becomes stiff — with no bending anywhere and no material property involved in the stiffness at all.

 The edge, and the length over which it is forgotten. A cylinder of radius 4.00 m and wall 12 mm under 0.6 N/mm² of internal pressure, held at its base. Away from the base the wall carries the pressure as pure hoop tension and bends nowhere, which is why a pressure vessel is a cylinder. At the base the hoop force is zero, because the wall cannot grow there, and the difference is made up by a boundary layer of bending that dies out inward. The length it dies out over is 1/β = 170 mm — 0.778√(Rt), a geometric mean of the radius and the thickness — and the moment is under a twentieth of its edge value by 3.07 of them. Nothing in that length is the load. The base moment is p/2β², and the bending stress it produces is 1.82 times the membrane hoop stress the whole design is about, at every pressure, every radius and every thickness: the ratio is √3/√(1 − ν²) and contains none of them. The hoop force overshoots by 4.3% at 3.2 lengths in, which is the wall springing back past where it was going. Internal forces

The length a structure was never given

A disturbance applied at one place dies out over a distance, and the distance is not something anybody chose. A beam forgets a badly applied load over its own depth. A beam on the ground forgets a point load over the fourth root of its stiffness against the soil's. A shell forgets a held edge over the square root of the radius times the thickness — a geometric mean of two lengths three orders of magnitude apart, which is neither of them and is not near either.

 The force nobody applied, and the speed it wins at. Lateral force per unit weight for a vehicle on a 400 m curve, against speed. The rising curve is what the free body demands — v²/gR, which is the body's own acceleration written on the other side of the equation — and the flat line is what 6.0° of cant supplies from the weight. They cross at 73 km/h, which is the speed the curve was set out for; below it the deficiency has the other sign and the rail is pushed the other way. The upper line is overturning, at b/2h = 0.399 — and there is no mass in that number, so a loaded vehicle and an empty one go over at the same 160 km/h and only the height of the load decides. At the 108 km/h drawn the deficiency is 0.124 of the weight, which is 49 kN on this 40 tonne vehicle. Equilibrium

The force that is really an acceleration

Every other load in this collection is applied by something. This one is applied by nothing at all — it is the body's own acceleration, written on the other side of the equation so that statics can be used on a problem statics has no business with. The move is legitimate, it is a hundred and eighty years old, and it is exactly half done more often than it is done.

The library, page 5 of 7 — where shell-membrane sits