Structural Engineering & Statics
where the load goes
Concept

Transition temperature — where it appears

The temperature at which a ferritic steel changes from ductile tearing to brittle cleavage, and therefore the axis along which its toughness has to be quoted. It shifts upward with plate thickness and with strain rate, so the same steel is more brittle as a thick section and under a fast load.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The crack length at which the strength stops mattering. Failure stress against crack length for a toughness of 100 MPa√m, with two steel grades drawn. The falling curve is fracture — Kc divided by Y times the root of pi a — and it does not know what the yield stress is. The horizontal lines are the grades. At 275 N/mm² the two cross at a crack 33.5 mm long; At 460 N/mm² the two cross at a crack 12.0 mm long. The stronger grade's transition is the shorter one — raising the yield stress does not raise the strength of a cracked member, it only shortens the crack that takes it away.

The flaw that sets the strength

A member with a crack twenty millimetres long fails at its yield stress. Make the steel stronger and the crack that does it gets shorter, so the same flaw that was harmless in the weaker grade decides the stronger one.

materials · fracture The same steel, brittle in January. Fracture toughness against temperature for a 25 mm ferritic plate, from Wallin's master curve — 30 + 70·exp(0.019(T − T₀)) in MPa√m, whose shape is the same for every ferritic steel and whose only free parameter is the reference temperature T₀ = -60 °C. Beside it, and on its own scale, is the crack length that toughness will tolerate at 200 N/mm², which goes as the square of it. At +20 °C this plate carries a 764 mm flaw and at -20 °C it carries 199 mm — a factor of 3.8 for a forty-degree change in the weather, in a steel that met its specification on both days. Thickness moves the curve as well, and the wrong way: constraint at a crack tip suppresses the yielding that would have blunted it, so a 100 mm plate of this steel tolerates 27% of the flaw a 10 mm plate does. Loading it in a millisecond shifts the whole curve another forty degrees.

The same steel, brittle in January

Every other material property in this collection is a number. Toughness is a curve, and the axis it runs along is temperature. Between twenty degrees and minus twenty a structural steel does not get gradually weaker — it changes the mechanism by which it fails, and the flaw it will tolerate falls by a factor of four.

materials · transition temperature

Named alongside it

The objects these essays reach for when they reach for this one.

DuctilityStress concentrationBrittle failureBrittle fractureCharpyConstraintCrack growthCritical crackFatigueFlawFractureFracture toughness

All concepts