Structural Engineering & Statics
where the load goes
Concept

Chord — where it appears

A truss's or a girder's continuous top or bottom member, which carries the global bending as an axial force over the depth between the two. Its force is the moment divided by that depth, so a chord's size is set by the span and the depth rather than by anything local to it.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

A built-up column has a second way to bend. A 12 m column of two chords 300 mm apart, joined by double lacing. On the left it buckles the way a solid column does, by bending; on the right the chords stay straight and the lattice racks, which a solid column cannot do at all. Neither happens alone, and the two flexibilities add rather than the two stiffnesses — so the critical load is 1287 kN against an Euler load of 1341 kN, which is 96% of it, and the column behaves as though its slenderness were 80 rather than 79.

The column made of two columns

A solid column buckles when its bending stiffness runs out. A laced one has a second way to go — the lattice shears, the chords stay straight — and the two flexibilities add rather than the two stiffnesses. A battened column reaches 23% of its own Euler load and behaves as though its slenderness were twice what it is.

stability · Built-up column The shear goes round the corner instead of across it. A 6-panel Vierendeel girder, 21 m by 6000 mm, under 300 kN at mid-span. There is no diagonal in it, so each panel's 150 kN of shear is carried as bending in the chords: the curves drawn along them are the chord moments, and every one passes through zero at the middle of its own panel. The local moment is the panel shear times the panel length over four, 131.3 kNm, and it adds to an axial force of 263 kN from the global moment at the same point. The girder deflects 109.09 mm against 6.53 mm for the same members triangulated — 16.70 times — and 98% of that movement is chord bending that a diagonal would have removed entirely.

The frame is a girder stood on end

Every unbraced building frame is a Vierendeel girder turned through ninety degrees, and the identification is not an analogy — it is the same equations with the axes swapped. Which means the frame inherits results that read as absurd for a building — more bays is stiffer, a wider building is not, and doubling one section property halves the sway.

structures · Vierendeel

Named alongside it

The objects these essays reach for when they reach for this one.

Shear stiffnessBattenBending stiffnessBucklingBuilt-up columnContraflexureDriftEffective slendernessEngesserEuler loadIndeterminacyLacing

All concepts