Structural Engineering & Statics
where the load goes
Series

Vierendeel — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. The shear goes round the corner instead of across it. A 6-panel Vierendeel girder, 12 m by 1500 mm, under 100 kN at mid-span. There is no diagonal in it, so each panel's 50 kN of shear is carried as bending in the chords: the curves drawn along them are the chord moments, and every one passes through zero at the middle of its own panel. The local moment is the panel shear times the panel length over four, 25.0 kNm, and it adds to an axial force of 200 kN from the global moment at the same point. The girder deflects 6.20 mm against 3.18 mm for the same members triangulated — 1.95 times — and 68% of that movement is chord bending that a diagonal would have removed entirely.

    The truss with no diagonals

    A rectangle without a diagonal is a mechanism, so a Vierendeel girder makes its corners rigid instead. The shear a diagonal would have carried as axial force now travels as bending in the chords, and bending is a far more expensive way to move a force.

    part 1 · structures
  2. The shear goes round the corner instead of across it. A 6-panel Vierendeel girder, 21 m by 6000 mm, under 300 kN at mid-span. There is no diagonal in it, so each panel's 150 kN of shear is carried as bending in the chords: the curves drawn along them are the chord moments, and every one passes through zero at the middle of its own panel. The local moment is the panel shear times the panel length over four, 131.3 kNm, and it adds to an axial force of 263 kN from the global moment at the same point. The girder deflects 109.09 mm against 6.53 mm for the same members triangulated — 16.70 times — and 98% of that movement is chord bending that a diagonal would have removed entirely.

    The frame is a girder stood on end

    Every unbraced building frame is a Vierendeel girder turned through ninety degrees, and the identification is not an analogy — it is the same equations with the axes swapped. Which means the frame inherits results that read as absurd for a building — more bays is stiffer, a wider building is not, and doubling one section property halves the sway.

    part 2 · structures

All series