Structural Engineering & Statics
where the load goes
Series

Thermal gradient — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The strain it wants, the strain it is allowed, and the difference. A bridge deck 1.40 m deep with 18 °C at the top face falling away over 10% of the depth. The left curve is the free thermal strain αT(y); the straight line beside it is what a plane section will actually take, ε₀ + κy with ε₀ = 32.0 microstrain and κ = 0.063 per km. The right-hand block is E times the difference, and it reaches -3.98 N/mm² of compression at the surface and 1.83 of tension 140 mm below it. Its resultant force is 8.3e-14 kN and its resultant moment 3.0e-12 kNm, which is what self-equilibrating means: the field is invisible to every equilibrium check that could be made on the member.

    The stress nobody restrained

    A bridge deck lying loose on its bearings, with nothing holding it anywhere, develops four newtons per square millimetre when the sun comes out. The stress is not caused by restraint. It is caused by plane sections, and it is invisible to every equilibrium check that could be made on the member.

    part 1 · sections

All series