Structural Engineering & Statics
where the load goes
Series

Effective cross-section — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The load did not move; the section did. A lipped channel 200 by 65 mm at 2 mm thick, drawn twice on top of itself: the outline as fabricated, and the part of it still working once the plates have buckled. The web is held on both edges, so it loses its middle; the flanges are held at the web, so an unlipped one would lose its free edge. What survives is not symmetric with what was drawn, so the centroid moves 8.0 mm — and a load applied along the axis it was designed to arrives 8.0 mm off the section that has to carry it. At the 177 kN this section will take, that is 1.42 kNm of bending nobody applied.

    What is left after it ripples

    A thin plate that buckles locally has not failed. It has stopped taking load in its middle and gone on taking it near its edges, so the member is now made of a different section from the one that was drawn — and the new one has its centroid somewhere else, which turns a concentric load into an eccentric one.

    part 1 · sections

All series