Structural Engineering & Statics
where the load goes
Series

Built-up column — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. A built-up column has a second way to bend. A 12 m column of two chords 300 mm apart, joined by double lacing. On the left it buckles the way a solid column does, by bending; on the right the chords stay straight and the lattice racks, which a solid column cannot do at all. Neither happens alone, and the two flexibilities add rather than the two stiffnesses — so the critical load is 1287 kN against an Euler load of 1341 kN, which is 96% of it, and the column behaves as though its slenderness were 80 rather than 79.

    The column made of two columns

    A solid column buckles when its bending stiffness runs out. A laced one has a second way to go — the lattice shears, the chords stay straight — and the two flexibilities add rather than the two stiffnesses. A battened column reaches 23% of its own Euler load and behaves as though its slenderness were twice what it is.

    part 1 · stability
  2. A built-up column has a second way to bend. A 24 m column of two chords 800 mm apart, joined by single lacing. On the left it buckles the way a solid column does, by bending; on the right the chords stay straight and the lattice racks, which a solid column cannot do at all. Neither happens alone, and the two flexibilities add rather than the two stiffnesses — so the critical load is 3832 kN against an Euler load of 4629 kN, which is 83% of it, and the column behaves as though its slenderness were 66 rather than 60.

    The lacing decides the force it has to carry

    A perfectly straight column carries no shear, so the diagonals of a built-up column are resisting a force that exists only because the column is crooked. Computing it turns out to be circular — the shear is amplified by the very flexibility the lacing supplies — and the rule of thumb that replaces the calculation is wrong by a factor that grows as the lacing gets worse.

    part 2 · stability

All series