Structural Engineering & Statics
where the load goes
Series

Bond — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The bond stress is crowded against the loaded end. A 20 mm bar embedded 806 mm, with the force in it and the bond stress on it plotted along the embedment. Uniform bond — the assumption behind every development length ever tabulated — is a flat stress and a straight line of force. An elastic bond of the same peak strength is neither: the slip is largest where the bar is pulled and dies away over 1/α = 471 mm, so the far end of the bar is doing almost nothing. At the design rule's length of 40 diameters the elastic bond is 55 per cent used. The uniform answer is what the bond looks like after it has yielded along the whole length, which is a statement about ductility rather than about strength.

    The force that arrives along a length

    A bolt takes its force at a hole and a weld along a line. A reinforcing bar has no such place — it is a smooth cylinder in a hole of its own shape, and the only thing stopping it sliding out is a stress smeared over its surface. So the force in it is not a number, it is a function of position.

    part 1 · internal-forces

All series