Structural Engineering & Statics
where the load goes
Series

Anisotropy — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. Strength at an angle, and the straight line that is not it. Compressive strength against the angle between the load and the grain. Hankinson's formula — f₀f₉₀ ÷ (f₀sin²α + f₉₀cos²α) — is an interpolation rather than a failure theory, and what makes it worth having is how far it sits from the straight line anyone would otherwise draw between 21 and 2.5 N/mm². At forty-five degrees it gives 4.5 N/mm² against the line's 11.8: 38 per cent of it, and 21 per cent of the strength along the grain. The curve drops away in the first twenty degrees because the weak direction starts governing as soon as it has any component at all, which is the same arithmetic as a section's weak axis and the reason a skewed bearing detail is a real loss rather than a small one.

    The material that has a direction

    Every material in this collection so far has had one modulus and one strength. Timber has three of each, differing by more than an order of magnitude, and the consequence is not a correction to steel design — it is a different set of checks with a different one governing.

    part 1 · materials

All series