Structural Engineering & Statics
where the load goes
Generator

Every path to the ground goes through the link

Rendered here at the parameters it defaults to, with every essay that calls it — which is the same list as the blast radius of changing it.
Every path to the ground goes through the link. A braced bay 8 m by 4 m whose two diagonals stop 800 mm apart instead of meeting. The storey shear reaches the ground through the diagonals, and the vertical components they deliver to the beam have to pass through the segment between them: the link carries 47% of the applied shear as a shear force, at a lever arm short enough that its ends reach 0 kNm while the rest of the beam carries 0. The deflected shape drawn is the solved one, magnified — the real drift under this load is 0.008 mm. Everything outside the link is designed to stay elastic while the link is yielding, which is what makes the mechanism a choice rather than a hope.

Every path to the ground goes through the link. A braced bay 8 m by 4 m whose two diagonals stop 800 mm apart instead of meeting. The storey shear reaches the ground through the diagonals, and the vertical components they deliver to the beam have to pass through the segment between them: the link carries 47% of the applied shear as a shear force, at a lever arm short enough that its ends reach 0 kNm while the rest of the beam carries 0. The deflected shape drawn is the solved one, magnified — the real drift under this load is 0.008 mm. Everything outside the link is designed to stay elastic while the link is yielding, which is what makes the mechanism a choice rather than a hope.

2 essays call brace-frame. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

Every path to the ground goes through the link. A braced bay 8 m by 4 m whose two diagonals stop 800 mm apart instead of meeting. The storey shear reaches the ground through the diagonals, and the vertical components they deliver to the beam have to pass through the segment between them: the link carries 47% of the applied shear as a shear force, at a lever arm short enough that its ends reach 0 kNm while the rest of the beam carries 0. The deflected shape drawn is the solved one, magnified — the real drift under this load is 0.008 mm. Everything outside the link is designed to stay elastic while the link is yielding, which is what makes the mechanism a choice rather than a hope. Structural form

The part that is meant to be weak

A braced frame is stiff and has nowhere to yield. A moment frame yields everywhere and is soft. Move the two diagonals a metre apart along the beam and the whole storey shear has to pass through the segment between them — which keeps most of the stiffness and puts every yielding in one member the designer chose.

 The two braces balance until one of them buckles. An inverted-V brace after the compression member has gone. While both braces are elastic they carry equal and opposite forces and their vertical components cancel on the beam above, which is why the beam in a chevron bay is usually sized for gravity alone. The compression brace buckles at 445 kN and then sheds most of what it was carrying — 30% is left here — while the tension brace goes on to yield at 1065. The difference between the two vertical components is 659 kN, applied at the middle of the span with no help from either brace, and it asks the beam for 1317 kNm against the 200 kNm the gravity load asks for — 6.6 times as much. The beam drawn does not: 1517 kNm against a capacity of 731. The force is not a load case anybody applies; it is what the frame leaves behind on its way to the state it will actually be in. Structural form

The force the brace leaves behind

Two braces meeting under a beam carry the storey shear as a tension and a compression whose vertical components cancel, so the beam above sees nothing. They cancel only while both braces are elastic. Once the compression brace buckles it sheds most of its force, the tension brace goes on to yield, and the difference is a point load at midspan that nobody applied.

The library, page 1 of 7 — where brace-frame sits