Structural Engineering & Statics
where the load goes
Ladder

Torque buckling — the ladder

One essay so far against this idea. A ladder is the distinct arguments that stand against one idea, and this one has room to grow.
  1. A buckling load with no compression anywhere in the member. A tube of radius 81.6 mm and wall 5 mm under pure torque — no axial load at all — buckles into a helix at T = 2πEI/L, which for the section drawn is 1877 kNm. Two things are absent from that expression and both are surprising: the length appears to the first power rather than the second, and the shear modulus does not appear at all, so the torsional stiffness of the member has nothing to do with the torque at which it buckles in torsion. The comparison is the torque that yields the same tube, 42.9 kNm — a factor of 43.8 below it. The mode arrives first only past a length of 263 m, which is πE/τ_y = 3219 radii and contains no thickness whatever.

    The buckling load with no compression in it

    Twist a straight bar hard enough and it snaps into a helix, with no axial load on it anywhere. The load at which that happens is 2πEI/L — first power of the length, and no shear modulus in it at all, so how stiff the bar is in torsion has nothing to do with the torque that buckles it in torsion.

    rung 1 · stability

All ladders