Structural Engineering & Statics
where the load goes
Series

Support width — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The bearing is one length and the web is loaded over another. A load applied over a stiff bearing of 200 mm on the flange of a girder with a 1200 × 8 mm web. The flange bends under it and the yield lines that form spread the load along the web over 659 mm — 3.3 times the bearing, and 70% of the yield resistance is that spread rather than the bearing. The effective length is not a decision anybody made: it is what the flange's own bending stiffness against the web's own strength works out to.

    The support that is not a point

    A reaction is drawn as a single arrow because the equilibrium equations only need its total. Underneath the arrow is a bearing of some width, delivering a pressure over that width, and almost everything a designer would like to know about the region near a support is a consequence of the width the arrow does not have.

    part 1 · internal-forces

All series