Structural Engineering & Statics
where the load goes
Series

Static moment — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. Two of these move and the third cannot. The first span of a 3-span beam under 5 kN/m, with the stiffness of the middle span swept over a factor of 25. The support moment and the mid-span moment both move — that is what redundancy does, and it is the whole reason a continuous beam has to be analysed rather than read off. Their combination does not: the mid-span ordinate plus the average of the two end moments is 30.6 kNm at every point on this axis, which is wL²/8 for this span and this load and contains nothing else. The largest departure anywhere on the sweep is 2.3e-16 of the value, which is the arithmetic of the stiffness solution rather than a property of the beam. Continuity buys a distribution and not a capacity, and this is the line that says so.

    Two of these move and the third cannot

    Cut one span of a continuous beam free and add up the forces on it. What comes out is that the mid-span moment plus the average of the two end moments equals the free bending moment of that span, with nothing else in it — no stiffness, no support settlement, no analysis at all. Continuity moves moment about. It does not reduce the total, and it never has.

    part 1 · internal-forces

All series