Structural Engineering & Statics
where the load goes
Series

Snap-through — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. A load with a maximum in it, and nothing bifurcates. Load against apex movement for a two-bar frame of half-span 1000 mm and rise 150 mm. The load rises to 133.4 kN at a movement of 64 mm — well short of the 150 mm that would bring the apex level — and then falls. Past that point the frame can only be held by taking load away, so under a dead weight it goes: 260 mm of movement at constant load, arriving inverted and in tension. The minimum on the path is -133.4 kN, the exact negative of the maximum, because the geometry is symmetric about the flat position and the arithmetic knows it.

    The roof that jumps

    Every stability failure in this collection so far has been a bifurcation — a straight thing discovering it can be bent. A shallow frame does something else entirely. It stays perfectly symmetric, deforms steadily, and at some point the load it can carry starts to fall while it is still moving in the direction it was pushed.

    part 1 · stability

All series