Structural Engineering & Statics
where the load goes
Series

Size effect — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. A strength that is a property of the specimen. Nominal strength against size for geometrically similar specimens of one material. On the left the specimen is too small for a crack to run and the strength is a plateau — a plastic limit, and the regime laboratory specimens sit in. On the right a crack releases more energy than it consumes as soon as it starts and the strength falls as the inverse square root of size, which is the regime real structures sit in. The turn happens at D₀ = 120 mm. A 100 mm specimen reads 3.10 N/mm² and a 1500 mm member of the same material carries 1.14: the test overestimates the structure by a factor of 2.71.

    The bigger one is the weaker one

    Two geometrically similar beams of the same concrete should fail at the same nominal stress, because a strength is supposed to be a material property. They do not. The large one fails at less, and the reason is that a crack releases energy in proportion to a volume and consumes it in proportion to an area.

    part 1 · materials

All series