Structural Engineering & Statics
where the load goes
Series

Shell action — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The hoops change their mind at an angle no proportion chose. The two membrane forces of a spherical dome of radius 30 m under 3 kN/m² of surface, taken from the crown to a base at 60°. The free body for the meridional force is the cap above a cone of half-angle φ, and vertical equilibrium of it gives N_φ = −wR/(1 + cos φ) directly: -45.0 kN/m at the crown falling to -60.0 at the base, compression everywhere. Equilibrium normal to the surface then gives the hoop force, which starts at -45.0 kN/m and reaches 15.0 — it changes sign, and the angle at which it does was found here by bisecting N_θ rather than quoted: 51.827292°. Setting N_θ = 0 gives cos²φ + cos φ − 1 = 0, so cos φ is (√5 − 1)/2, the reciprocal of the golden ratio — an identity this site's solver gate checks against the bisection to nine decimals rather than asserting, because it is too pretty to be believed on sight. Below that parallel the hoops are in tension, which masonry has none of, and that is where every old dome is cracked.

    The surface that carries by being curved

    A flat plate spends its thickness on a lever arm of a few millimetres. Curve the same sheet and the load is carried in the surface itself, at a thirtieth of the thickness — and the entire bill is presented at the edges.

    part 1 · structures

All series