Structural Engineering & Statics
where the load goes
Ladder

Shear area — the ladder

One essay so far against this idea. A ladder is the distinct arguments that stand against one idea, and this one has room to grow.
  1. A section has two areas and the tables give one of them. Peak shear stress divided by the mean, for four sections of exactly the same gross area and depth. The mean is V/A and is the number a first calculation uses; the peak is what the material actually sees, and the ratio between them is a property of shape alone. A rectangle's is 1.5 — the parabola's peak over its average — and it is one of the few numbers in this subject that is exactly derivable and universally ignored. An I-section's is near 1.98, and the reason is on the second bar: 97% of the shear is inside a web that is 56% of the area. So the flanges carry the moment and almost none of the shear, and the web carries the shear and almost none of the moment — which is why a shear check on an I-section uses the web area and a moment check uses the whole section, and why the two checks are about two different pieces of steel.

    The section has two areas

    A shear force divided by the area of the section is not the shear stress anywhere in it. A rectangle's peak is exactly one and a half times that number and an I-section's web carries nearly all of the shear over a fifth of the area, which is why a moment check and a shear check on the same member are checks on two different pieces of steel.

    rung 1 · sections

All ladders