Structural Engineering & Statics
where the load goes
Series

Principal axes — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. Loaded straight down, and moving sideways. An equal angle with a moment applied about the horizontal axis. Its principal axes lie at 45.0° to the drawn ones, so the neutral axis runs at -30.6° rather than horizontally, and the section moves 59% as far sideways as it moves down. The product of inertia that causes it is -1.066 × 10⁶ mm⁴, and it is zero for every section drawn in this field until now.

    Loaded straight down, and it moves sideways

    Every section drawn here so far had an axis of symmetry, and that symmetry has been doing silent work. Take it away and a vertical load produces a neutral axis that is not horizontal, a deflection that is not vertical, and on one ordinary section a sideways movement larger than the downward one.

    part 1 · sections
  2. The second moment of area is a function of direction. Second moment of area of an equal angle against the angle of the axis it is taken about, with the product of inertia beneath it. The maximum is 5.943 × 10⁶ mm⁴ and the minimum 1.523 × 10⁶, a ratio of 3.90, and they occur where the product of inertia passes through zero — at 45.0° from the drawn axis. The value the drawing suggests, 3.733 × 10⁶, is neither of them.

    The axis a column buckles about

    A strut buckles about the axis with the smallest second moment of area, and for a section with no axis of symmetry that axis is neither of the two on the drawing. An angle used as a strut is 2.45 times weaker than the number a designer reads off its own dimensions.

    part 2 · sections

All series