Structural Engineering & Statics
where the load goes
Series

Instantaneous centre — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The point the rafter turns about, which is off the frame. A pitched portal of 8 m span and 4.0 m to the eaves, with a 1.5 m rise, collapsing. Each rigid part of the mechanism rotates about some point: the left column about its base hinge, the right about its own. The rafter between them does neither, and its centre is found by one rule — two bodies joined at a hinge share that hinge, so the second body's centre lies on the line through the first body's centre and the hinge, extended. Two hinges give two lines and they cross at (8.0, 11.0) metres, which is 5.5 m above the ridge and outside any drawing of the frame itself. From there the whole collapse is two ratios of lengths and no trigonometry: the load factor is 1.339. Flatten the roof and the centre descends; make the two lines parallel and it goes to infinity, which is the statement that the rafter translates instead of turning.

    The point the mechanism turns about

    A collapsing frame is a chain of rigid pieces, and every piece is rotating about some point. Find those points and the whole collapse load reads off two ratios of lengths, with no trigonometry anywhere — and for a pitched roof the point in question is well above the top of the drawing.

    part 1 · equilibrium

All series