Structural Engineering & Statics
where the load goes
Series

Folded plate — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The same sheet, twice, and a factor of ten thousand. A 3000 mm developed width of 3 mm sheet, covering 2400 mm in plan — so the legs sit at 36.9° and the fold is 300 mm deep. Flat, its second moment about its own mid-plane is 6750 mm⁴, which spans nothing. Folded, it is 67.50×10⁶ — 10000 times as much, which is exactly the depth in thicknesses squared. The material is identical, the plan cover has fallen by 20%, and the only thing that changed is where the material sits. What limits it is buckling of the leg: at this leg length the flat between the folds goes at 27 N/mm², well below the steel's 275.

    Folded until it spans

    A flat sheet has a second moment of area of B·t³/12 and will not span anything. Folded, the same material has B·t·h²/12, and the gain is exactly the fold depth over the thickness, squared — a ratio with no material in it and no width in it.

    part 1 · structures

All series