Structural Engineering & Statics
where the load goes
Series

Drift components — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. One drift, two motions, opposite curvatures. The sideways movement of a 120 m building under a uniform wind, drawn as the sum of the two mechanisms that produce it. The bending curve is a cantilever's: flat at the base, steepening upward, concave one way. The racking curve is a stack of parallelograms: steepest at the base and flattening, concave the other. They add to 366 mm at the roof, of which 61% is bending. The one group that decides the split is αH = H√(GA/EI) = 2.48: below one the racking dominates and the building behaves as a frame, above about six the bending does and it behaves as a cantilever, and everything interesting is in between.

    Two motions with one name

    A tall building's sway is two movements added. A frame racks like a stack of parallelograms, worst at the bottom; a cantilever bends about its base, worst at the top. The total at roof level says nothing about which storey is worst, and on this building it is neither.

    part 1 · deflection

All series