Structural Engineering & Statics
where the load goes
Series

Deflection distribution — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. Half the beam does nearly all of the deflecting. The virtual-work integrand M·m/EI along the member, normalised to its own peak, with the running share of the answer beside it. The integrand is a density: it says how much of the deflection each millimetre of the beam produced. For this case the half nearest the root supplies 87.5 per cent of it, and the rest of the member supplies the remainder. Stiffening the busy 50 per cent by 1.5 times takes the deflection down by 29.2 per cent; the same material spent on the quiet end takes it down by 4.2 — a factor of 7.0 for the same steel. The map of what is contributing is not the map of where the moment is largest, and the second is the one that gets drawn.

    Where a deflection comes from

    The unit-load method gives a deflection as an integral, and this collection has treated that integral as a number to evaluate. It is not a number. It is a density, and it says which millimetres of the member produced the answer — which is not the same map as where the moment is largest.

    part 1 · deflection

All series