Structural Engineering & Statics
where the load goes
Ladder

Curtailment — the ladder

One essay so far against this idea. A ladder is the distinct arguments that stand against one idea, and this one has room to grow.
  1. Where a bar may stop, and how far past there it goes anyway. The tension the bottom steel must carry along a 9 m beam, and the resistance of the bars actually present, drawn as a staircase. The demand is the moment diagram divided by the lever arm and then SHIFTED 270 mm toward midspan, because the truss inside the beam delivers its shear diagonally — the two constructions agree to 0.36 per cent, which is the second-order term and nothing else. Each curtailed layer then runs a further 1150 mm to develop, so the outer layer stops at 245 mm rather than the 1665 mm the moment diagram allows. The tail is 1420 mm at each end — 16 per cent of the span — and it is what turns a 20 per cent saving into 2.2.

    Where a bar may stop

    The moment diagram falls away from midspan, so the steel midspan needs is not needed everywhere, and curtailing it saves real money. Then two things get in the way, and between them they take nine tenths of what the moment diagram promised.

    rung 1 · sections

All ladders