Structural Engineering & Statics
where the load goes
Series

Corrugated web — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. Pull it along the girder and it just unfolds. One period of a 30° trapezoidal corrugation, 300 mm of flat and 260 mm of incline, and the same period pulled along the girder's axis. The fold opens by bending the inclined panels out of the web's own plane, so the axial flexibility contains the plate's t³ where a flat web's would contain t — and the effective modulus that comes back from solving the cell as a frame is 222 N/mm², which is 10.6 parts in ten thousand of the steel's 210 GPa. A web with a thousandth of the stiffness carries a thousandth of the stress, which is why the flanges of a corrugated girder carry the whole moment and why the section has 9 per cent less second moment than the flat-webbed girder it replaces. The fold buys freedom from stiffeners and pays for it here.

    The web that carries no bending

    A corrugated web needs no stiffeners, because the folds give it in one direction a depth it does not have in its thickness. In the other direction the same folds make it an accordion — and a web that cannot be stretched cannot carry a bending stress at all.

    part 1 · sections

All series