Structural Engineering & Statics
where the load goes
Ladder

Conjugate beam — the ladder

One essay so far against this idea. A ladder is the distinct arguments that stand against one idea, and this one has room to grow.
  1. The same curve, computed twice and from opposite ends. A cantilever of 6 m, with its deflected shape drawn from a double integration of M/EI and the bending moment of its conjugate beam drawn on top of it. The conjugate is the same span carrying M/EI as a load, with its supports transformed — a real fixed end becomes a free end and a real free end becomes a fixed one, because a fixed end has no slope and no deflection and the conjugate therefore needs no shear and no moment there. The two curves agree to 4.7e-6 of the largest deflection, which is the trapezium rule and not the method. The largest deflection is 36.00 mm against the closed form's 36.00. The reaction of the conjugate beam is -9.000 milliradians, which is the real beam's rotation at that support — so the whole of a slope calculation is one reaction.

    The beam whose moment is a deflection

    A beam's bending moment is the second integral of its load. Its deflection is the second integral of M/EI. They are the same problem, so a deflection can be found by loading a fictitious beam with M/EI and asking a statics question — and the only thing to remember is the supports, which are not remembered but derived, one boundary condition at a time.

    rung 1 · deflection

All ladders