Structural Engineering & Statics
where the load goes
Series

Confinement — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The same concrete, held sideways. Two stress-strain curves for one concrete. The lower is a cylinder test: it peaks at 30 N/mm² near a strain of 0.002 and has nothing left by 0.0035, because it fails by splitting apart sideways. The upper is the same material inside a 12 mm hoop at 100 mm centres, which cannot stop it expanding but can make the expansion stretch steel: the lateral pressure of 2.48 N/mm² — 8% of the strength it is multiplying — takes the peak to 44.4 and the ultimate strain to 0.028. The strength gain is 1.48 times and the strain gain 8.0; the area under the curve, which is the toughness, goes up by 11. It is the third number the confinement is provided for.

    Squeezed sideways into a different material

    Concrete in a cylinder test fails by splitting apart sideways under a load pushing it down. Put a hoop round it and the splitting has to stretch steel — and a lateral pressure of a twelfth of the strength raises the strength by half and the ultimate strain by eight.

    part 1 · materials

All series