Structural Engineering & Statics
where the load goes
Series

Cable stiffness — the series

One essay so far on this idea, and more questions about it than one essay answers.
  1. The further it deflects, the harder it pulls back. Total load against midspan sag for a 30 m cable of 1000 mm² prestressed to 500 kN, carrying 5 kN/m. The cubic H³ − T₀H² − w²L²EA/24 = 0 was bisected at every point of the curve, so the sag at the full 150 kN is 0.740 m rather than the 1.125 m the flat-cable formula WL/8T₀ gives — the straight dashed line, which is the tangent to this curve at the origin and nothing more. Its slope is the initial stiffness 8T₀/L = 133.3 kN/m; at the marked point the tangent has reached 341.2 kN/m, 2.56 times as stiff, and the horizontal component of the tension has risen from 500 kN to 760 kN. Nothing about the steel changed. The geometry got better at the job.

    The stiffness that comes from the shape

    A cable has no bending stiffness whatever, and it still holds up a roof. What resists the load is the change of its own geometry, so its stiffness is a function of the tension already in it — and prestress buys stiffness that no change of material could.

    part 1 · structures

All series