Structural Engineering & Statics
where the load goes
Generator

The support-position generator

Rendered here at the parameters it defaults to, with every essay that calls it — which is the same list as the blast radius of changing it.
Where to put the supportsPeak sagging and hogging moment for a uniformly loaded beam, against how far the supports are moved in from the ends. The best arrangement is where the two curves cross, and it is nowhere near the ends.00.050.10.150.20.250.30.3501020304050overhang, as a fraction of the spanbest at 21% — peak 8.8sagging, mid-spanhogging, over the supportmoving the supports in by a third of the way halves the worst moment

2 essays call support-position. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

00.050.10.150.20.250.30.3501020304050overhang, as a fraction of the spanbest at 21% — peak 8.8sagging, mid-spanhogging, over the supportmoving the supports in by a third of the way halves the worst moment Internal forces

Where to put the supports, which is not at the ends

Moving the supports of a uniformly loaded beam inward by about a fifth of its length halves the worst bending moment. The load has not changed and nor has the beam.

 12012080resultantmidspan05101520020040060080010001200station along the spangreatest moment ever seen there1160.2 at 9.88Barré: 1160.3 at 9.88 Internal forces

The train that is worse than its heaviest axle

An influence line says where to stand one load. A vehicle is several loads at fixed spacings, and the worst arrangement never puts the heaviest one at the peak.

The whole library